Lexie Kensington Posted September 20, 2022 Share Posted September 20, 2022 Below is what I have left of a H&H 8532 4 position snap switch from an Emerson CF circa 1925-30, Type 35611 (No Serial Number) "Hotel" Fan six blades. This switch is operational but, as you can see, lacks the cover. Can anybody direct me to a cover for this switch? I have another incomplete H&H Switch I harvested from another Emerson CF I could use for trade. Many parts are intact including the Porcelain. Cheers- Lexie in Vermont Quote Link to comment Share on other sites More sharing options...
Michael Rathberger Posted September 20, 2022 Share Posted September 20, 2022 Measure the base. Bottom is fine. H&H is probably hart and hegman. I might have one. Quote Link to comment Share on other sites More sharing options...
Lexie Kensington Posted September 20, 2022 Author Share Posted September 20, 2022 The base measures 2 and 1/4" (when viewed in person), and H&H is on the Knob. If someone has the nickle plated cover that they'd sell, I would like to talk. Quote Link to comment Share on other sites More sharing options...
Michael Rathberger Posted September 20, 2022 Share Posted September 20, 2022 You need the one with the window. Even and off on would probably work. Checked this house and I don't have that, but may next door. Will look tomorrow. In the meantime, just check eBay, they shouldn't be more than 20. Again, the on off with the window, a switch like you have gets expensive. 1 Quote Link to comment Share on other sites More sharing options...
Russ Huber Posted September 21, 2022 Share Posted September 21, 2022 I have a box full of rotary switches stashed. 8 chances out of 10 I won't find what you need. But keep your fingers crossed for the 2 chances out of 10 in favor. 1 Quote Link to comment Share on other sites More sharing options...
Lexie Kensington Posted September 21, 2022 Author Share Posted September 21, 2022 Thanks folks! I appreciate the outreach! Quote Link to comment Share on other sites More sharing options...
Russ Huber Posted September 21, 2022 Share Posted September 21, 2022 (edited) This is from a H & H with wider porcelain switch body, but, would the cover slip over your switch body lip? If mine is too tall, you can modify that issue. Edited September 21, 2022 by Russ Huber 1 Quote Link to comment Share on other sites More sharing options...
Russ Huber Posted September 21, 2022 Share Posted September 21, 2022 I have another H&H cover same width, not as tall, in copper. Quote Link to comment Share on other sites More sharing options...
Russ Huber Posted September 29, 2022 Share Posted September 29, 2022 Your switch with cover shipped USPS today to the address you provided. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.