John Landstrom Posted February 18, 2023 Share Posted February 18, 2023 Never worked on a Westinghouse before. Also not familiar with parts availability or ease of repair. craigslist: https://portland.craigslist.org/mlt/clt/d/portland-antique-westinghouse-electric/7570556134.html details: vintage Westinghouse Electric Fan being sold “as is”Features 4 BRASS Blades plus a classic cage with wavy design.The Cage measures 13” in diameter but the blade is just over 12”The fan stand about 17” tall all together. Tag says STYLE: 164848G , 100-120 Volts, 60 Cycles, Patented 10.9.06, 9.6.10 525 (8.3.17), 2.29.18The is an oscillating fan and it can be adjusted to tilt up and down. * Cosmetically, Condition is Very Good.It's in very good physical condition, but it does not runNo repair attempts (by me)One cage nut is missing$160 OBO when made in person See any issues? Any cautions? Worth the effort? Quote Link to comment Share on other sites More sharing options...
Dave McManaman Posted February 18, 2023 Share Posted February 18, 2023 (edited) Too much at $160 imo. Even if it ran which it currently doesn’t. Plus, Westy stamped steel can be very hard to work on if you need to pull the stator (ie to change a headwire, paint, etc). I’d pass. Edited February 18, 2023 by Dave McManaman 3 Quote Link to comment Share on other sites More sharing options...
Steve Butler Posted February 18, 2023 Share Posted February 18, 2023 I agree with Dave. In it’s current unknown state $75 seems like the high end to me. Best of luck. 2 Quote Link to comment Share on other sites More sharing options...
Lane Shirey Posted February 18, 2023 Share Posted February 18, 2023 Dave Hoatson sells a tool to remove the stator, but I’d look for an easier fan to restore. 2 Quote Link to comment Share on other sites More sharing options...
David Kilnapp Posted February 18, 2023 Share Posted February 18, 2023 (edited) I'm with Lane on this one. Stamped steel Westy's are very tough to work on particularly if you need to remove the stator to replace the headwires which tend to fray or break at the point that they enter the case in the back. And then there is the issue of all the pot metal parts on this fan (the nose on the front and parts of the gear housing on the rear of the case) which will easily fracture if you attempt to remove them. I've said this before that if a stamped steel Westy was the first fan I restored, I probably would not have gone any further with this hobby. A GE or Emerson would be a better candidate for a first restoration IMHO. I've restored over 200 fans at this point and even with all that experience, I would still avoid a stamped steel Westy. Don't get me wrong, they look nice when they are done. Edited February 18, 2023 by David Kilnapp 2 Quote Link to comment Share on other sites More sharing options...
John Landstrom Posted February 18, 2023 Author Share Posted February 18, 2023 Thanks guys ! I’ll pass. Don’t need a headache. Quote Link to comment Share on other sites More sharing options...
Vic Valencheck Posted February 18, 2023 Share Posted February 18, 2023 Looks like it has the wrong cage. Could be a good parts fan. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.