Cam Kuruliak Posted March 4, 2022 Share Posted March 4, 2022 I have a 12 inch GE BMY fan Serial # 887922 It has the CSS in it along with a pull out knob that locks the trunnion when you can use it as a wall mount I did some research and I believe these were made one year in 1915? It growls when you start it up but runs smooth I have another question When I turn it on to the first speed it is the "high" speed and goes down from there. In fact on position "3" it turns off so I do have a speed coil issue for sure Seems the wiring was untouched to me. Any help much appreciated I hooked up a temporary power cord to show what is happening Thanks for your input Cam DSCN2528.MOV Quote Link to comment Share on other sites More sharing options...
Arjun Saini Posted March 4, 2022 Share Posted March 4, 2022 I want to say 1908-1909. But I’m not sure Quote Link to comment Share on other sites More sharing options...
Steve Butler Posted March 5, 2022 Share Posted March 5, 2022 Does it have flat front mount struts or angled side mount struts? I think 08 is flat and 09 is angled. Quote Link to comment Share on other sites More sharing options...
Jim Humphrey Posted March 5, 2022 Share Posted March 5, 2022 (edited) Hi Cam, That Serial Number would more correspond to 1911 or 12, any possibility you misread the S/N? I've got a BMY S/N 388038 with the pull knob on the base, any chance the 8s in your S/N are 3s? Jim Edited March 5, 2022 by Jim Humphrey Add info Quote Link to comment Share on other sites More sharing options...
Russ Huber Posted March 5, 2022 Share Posted March 5, 2022 (edited) 08-09 centrifugal start models don't have a base trunnion pivot. An early 1910 centrifugal start would. In the GE 1911 fan motor bulletin it was announced the centrifugal start mechanism had been discontinued 1910 GE BMY Big Motor Yoke Fan - antiquefanparts Edited March 5, 2022 by Russ Huber 1 Quote Link to comment Share on other sites More sharing options...
Russ Huber Posted March 5, 2022 Share Posted March 5, 2022 (edited) Late 09 or dirt early 10 centrifugal start variant. Notice the trunnion can only swivel side to side. Edited March 5, 2022 by Russ Huber 1 Quote Link to comment Share on other sites More sharing options...
Cam Kuruliak Posted March 5, 2022 Author Share Posted March 5, 2022 oops I put thee wrong serial number down it should be 387922 and the struts are angled with no profile on them Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.